Dual 7" 3RU IPS 1280x800 Broadcast LCD Rack Mount Monitor with 3G-SDI, HDMI, AV input and output D71

Model：D71

Introduction

Screen Size：  7"x2 IPS
Resolution：   1280x800 pixels
Aspect ratio： 16:10
Brightness：   400cd/m²

Input

3G-SDI, HDMI, Video, Audio(L/R), Ethernet

Output

3G-SDI, HDMI, Video, Stereo Headphone

Dual 7" 3RU Rack Monitors
D71 are extremely thin and lightweight. 7" 3RU Rack Monitors with dual 7” IPS 1080x800 screens, viewing SD, HD and 3G-SDI video on 3RU rack monitor.With GPIO for Software control via Ethernet connection. FEELWORLD Rack mount LCD monitor has been widely used in all levels of TV news production, post production, programme broadcasting and TV broadcasting trucks, special vehicles video surveillance and other fields. Since this series is working with other adjacent professional equipments, therefore, the high stability, high reliability and electromagnetic compatibility are very important conditions to make sure the whole system work smoothly.

Enjoy Consistent Images from Any Perspective
D71 uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output of up to 400nit. This means you’ll be able to see accurate, consistent and bright images from any point of view.

Easy to operate, time-saving
Consistent design style, the same function and operation mode setting is one of the features of the products. Users only need to know one product operation mode, you can operate the full range products, time-saving and convenient.

Multiple Inputs and Outputs
SDI / HDMI / CVBS / Audio
Each LCD of D71 monitor supports:
Input:
3G-SDI X 1
HDMI X 1
CVBS X 1
Auido (L/R) X 2

Output:
3G-SDI X 1
HDMI X 1
Video X 1

Audio:
Stereo Headphone

Network Control
D71 rack mount Monitor includes a LAN port,This allows the operator to Software control via Ethernet connection (software included). The rear panel LAN 100 port connects the unit to the LAN. Once connected, the user simply locates the IP address of any one of the units connected to the LAN. This is accomplished by going to the MAIN MENU of any of the connected units and selecting the NETWORK CONFIGURATION submenu. This willthen display the IP address of that unit. Simply type this IP address into the address bar of your Software. It is possible to poll your LAN for all other units connected by accessing the NETWORK tab from the Top Menu.

The user can then control multiple networked D71 monitor at once using a single Software. The user may select which monitor(s) they wish to control and send commands to those particular monitors. The browser provides real-time status of any connected monitor, ensuring consistent signals / feeds and so forth.

3-color Tally Light
DB-9 input signal
There are front TALLY lights for each screen, with 3 colors display (Red,Green,Yellow), and controlled via DB-9 ports on the rear panel.

Stablity and Reliability
As rack mount LCD monitors usually in a continuous working condition, all components including LCD panel must be accordance with industrial quality standard. Full Metal case not only makes the product more robust, and durable, but also is a good solution to the heat dissipation problem.

1. Wide view angle IPS Screen, High resolution 1280x800, bright, colorful display
2. Slim design and 3RU size
3. 3G-SDI, HDMI, Video, Audio(L/R) and 3G-SDI, HDMI, Video loop-through output
4. Software control via Ethernet connection
5. Special Features:
* Peaking Focus Assist (Red highlight over parts of the monochrome image in focus)
* Check Field (Red, Green, Blue, Mono)
* Pixel to Pixel
* Center Marker
* Safe Marker (80%, 85%, 90%, 93%, 96%, 2.35:1)
* Image Flip (Horizontal, Vertical, Hor&Ver)
* Image Freeze
* Zoom All
* U/D & L/R Zoom
* Custom Color Temperature
6. Monitoring via front panel 3.5mm stereo headphone jacks
7. Built-in LED tally indicators (Red, Green, Yellow)
8. Power using included 12-volt supply or use standard 4-pin XLR

Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.

Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.

Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail.

Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%,2.35:1)

Image Flip
The Horizontal, Vertical and Hor&Ver of the image around flip.

Display Spec.

Model	D71 (D71-H: W/O SDI)
Screen Size	7"×2 IPS
Resolution	1280×800 pixels
Dot pitch	0.117 (H)×0.117 (V) mm
Aspect Ratio	16:10
Brightness	400cd/m²
Contrast Ratio	800:1
Backlight	LED
Viewing Angle	89°/89°(L/R) 89°/89°(U/D)

Input (Each LCD)

1 X BNC	3G-SDI
1 X HDMI	HDMI
1 X BNC	Video
2 X RCA	Audio(L/R)

Output (Each LCD)

1 X BNC	3G-SDI
1 X HDMI	HDMI
1 X BNC	Video

Audio (Each LCD)

Audio Out

Stereo Headphone × 1

SDI Support Format

480i/576i

720p(60/59.94/50/30/29/25/24/23.98)

1080i(60/59.94/50)

1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)

HDMI Support Format

480i/576i/480p/576p

1080i (60/59.94/50)

720p (60/59.94/50/30/29/25/24/23.98)

1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)

General

Input Voltage	DC9～24V
Power Consumption	≤20W
Power Connector	DC/ 4-pin XLR
Working Temperature	-20°C~55°C
Storage Temperature	-30°C~65°C
Install Way	Rack Mount
Unit Size	482.6Lx132Hx30.5D mm
Unit Weight	1890g

Advanced Features

* Peaking Focus Assist(Red highlight over parts of the monochrome image in focus)

* Check Field (Red,Green,Blue,Mono)

* Pixel to Pixel

* Center Marker

* Screen Marker (80%,85%,90%,93%,96%,2.35:1)

* Image Flip (H, V, H/V)

* Image Freeze

* Zoom All

* U/D & L/R Zoom

* Custom Color Temperature

* Built-in LED tally indicators (Red, Green, Yellow)

Dimensions (Unit: mm)

Standard Accessories:
1× 3A Power Adapter
1× Tally Kit
1× Operation Manual

Pre：Return list
Next：FW5D-TRM/O