HOME > PRODUCTS > HDMI Camera Field Monitor

10.1" IPS 1920x1200 HDMI Camera-Top Monitor with Peaking Focus FW1018V1

Model：FW1018V1

Introduction

Screen Size：  10.1" IPS
Resolution：   1920x1200 pixels
Aspect ratio： 16:10
Brightness：   320cd/m²

Input

HDMI, Ypbpr, Video, Audio(L/R)

Output

HDMI, Ypbpr, Video, Stereo Headphone, Speaker(bulit-in)

The FEELWORLD FW1018V1 10.1”IPS HD LCD On-Camera monitor is one of the best monitors of its kind. Thanks to FEELWORLD's good price-quality ratio, many professional photographers and videographers choose for FEELWORLD. The monitor also features image measurement functions like Focus Assist, Center Marker, Safe Frame, Check Field, Camera Mode, Aspect Ratio, Image Flip, Pixel-to-Pixel and Image Freeze you will be able to analyze the image. These functions are assignable across six function buttons on the front panel.

The large size 10.1 inch enables you to focus clearly on your shots and eliminate the guesswork from framing. It blows up your tiny built-in camera screen to a much larger display that enables easier viewing and won't strain your eyes. With brightness levels of 320cd/m², a 800:1 contrast ratio and 170° vertical and horizontal viewing angles this monitor is a useful tool when shooting video or stills, providing you with a larger image than your camera's built-in viewfinder or LCD screen. FW1018V1 provides maximum versatility with multiple inputs: HDMI, Ypbpr, Video, Audio(L/R) and HDMI, Ypbpr, Video loop-through output, you can connect it directly to any DSLR or HD video.

1920X1200 IPS FHD Panel
Enjoy Consistent Images from Any Perspective. FW1018V1 uses an IPS panel, which provides a wide 170°/170° viewing angle and brightness output, up to 320cd/m². This means you'll be able to see accurate, consistent and bright images from any viewing point.

Multiple Inputs and Outputs
HDMI / YPbPr / Video / Audio
Input:
HDMI X 1
Y X 1
Pb X 1
Pr X 1
Video X 1
Auido (L/R) X 2

Output:
HDMI X 1
Y X 1
Pb X 1
Pr X 1
Video X 1

Audio:
Stereo Headphone
Internal Speaker

Professional Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.

3-color Tally Light
DB-9 input signal
There is front TALLY lights with 3 colors display, and controlled via DB-9 ports on the rear panel.

Flexible Battery Systerm
The monitor is powered from 4-pin XLR connector, or 12V DC input with the included power adapter, and FW1018V1 has flexible battery systerm that supports F970, LP-E6, D28S, Anton, Sony V mount plates of your choice.

1. Wide view angle IPS Screen, High resolution 1920x1200, bright, colorful display
2. High Contrast: 800:1
3. High Brightness: 320cd/m²
4. 160°wide viewing angles IPS Panel
5. HDMI, Ypbpr, Video, Audio(L/R) inputs and HDMI, Ypbpr, Video loop-through outputs
6. Peaking Focus Assist
7. Nine Grid
8. Camera Mode
9. Zoom (4x,9x,16x)
10. Anamorphic Mode (1.3x,2.0x,2.0x mag)
11. Pixel to Pixel
12. Center Marker
13. Safe Area (80%,85%,90%,93%,96%,2.35:1)
14. Ratio marker (4:3,13:9,14:9,15:9,16:9,1.85:1,2.35:1)
15. Marker Color (Red,Green,Blue,White,Black）
16. Check Field (Red/Green/Blue/Mono)
17. Image Flip (H, V, H/V)
18. Image Freeze
19. Zoom All
20. U/D & L/R Zoom
21. Color Temperature Adjustment

Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.

Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.

Camera Mode Function
It will be full screen under camera mode.

Zoom In (4X, 9X, 16X)
Image magnification is HD signal in any part, an amplification for high quality close-up.

Anamorphic Mode
Built-in selection of no squeeze, 1.3× or 2.0× allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not de-squeeze in camera.

Image Flip
The Horizontal,Vertical and Hor&Ver of the image around flip.

Nine Grid
Zoom one of the images to realize the full screen. You can switch the Mark color between Red, Green, Blue, White, Black according to different tone of the subject.

Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling.This feature is essential for capturing optimum detail.

Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%, 2.35:1). You can switch the Mark color between Red, Green, Blue, White and Black according to different tone of the subject.

Ratio Marker
(4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Frame blanking zone includes 6 Levels, from 0-6 (Transparent to Black). You can switch the Mark color between red, green, blue, white and black according to different tone of the subject.

Display Spec.

Model	FW1018V1
Screen Size	10.1" IPS
Resolution	1920×1200 pixels
Dot pitch	0.113(H)×0.113 (W) mm
Aspect Ratio	16:10
Brightness	320cd/m²
Contrast Ratio	800:1
Backlight	LED
Viewing Angle	85°/85°(L/R) 85°/85°(U/D)

Input

1 X HDMI	HDMI
1 X BNC	Y
1 X BNC	Pb
1 X BNC	Pr
1 X BNC	Video
2 X RCA	Audio(L/R)
1 X DB-9	Tally

Output

1 X HDMI	HDMI
1 X BNC	Y
1 X BNC	Pb
1 X BNC	Pr
1 X BNC	Video

Audio

Stereo Headphone, Speaker

SDI Support Format

480i/576i

720p(60/59.94/50/30/29/25/24/23.98)

1080i(60/59.94/50)

1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)

HDMI Support Format

480i/576i/480p/576p

1080i (60/59.94/50)

720p (60/59.94/50/30/29/25/24/23.98)

1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)

4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz), 4096×2160p (24Hz)

General

Input Voltage	DC6～36V
Power Consumption	≤12W
Power Connector	DC/ 4-pin XLR
Battery Plate	F970 (Standard); D28S, LP-E6, V-Mount, Anton Bauer (Optional)
Working Temperature	-20°C~55°C
Storage Temperature	-30°C~65°C
Install Way	1/4"-20 Thread Socket (3 sides left&right&bottom)
Unit Size	258L×192H×39D mm
Unit Weight	810g

Advanced Features

* Peaking Focus Assist

* Check Field (Red, Green, Blue, Mono)

* Camera Mode

* Anamorphic Mode (1.3x, 2.0x, 2.0x mag)

* Image Flip (H, V, H/V)

* Image Freeze

* Center Marker

* Screen Marker (80%,85%,90%,93%,96%, 2.35:1)

* Ratio marker (4:3,13:9,14:9,15:9,16:9,1.85:1,2.35:1)

* Color Temperature Adjustment

* Nine Grid (Zoom one of the images to realize the full screen) (Nonsupport in 4K input)

* Zoom (4X, 9X, 16X) (Nonsupport in 4K input)

* Aspect Ratio (Nonsupport in 4K input)

* Pixel to Pixel (Nonsupport in 4K input)

* Zoom All (Nonsupport in 4K input)

* U/D Zoom (Nonsupport in 4K input)

* L/R Zoom (Nonsupport in 4K input)

Standard Accessories:
1× Mini HDMI Cable
1× Sunshade
1× Hot Shoe Mount
1× F970 Battery Plate
1× Tally Kit
1× U bracket
1× Operation Manual

Pre：Return list
Next：F570